2021-08-29

What are the causes of washing machine leaking water? How can it be disposed of immediately?

Housewives suffer from frequent washing machine malfunctions, regardless of the type of model or country of manufacture. Some of them cause distortion of the general shape, in addition to damaging the contents and components of the washing machine and its surroundings, so there is a need to read this article carefully, to know those reasons, and how to avoid and get rid of them. 
Causes of washing machine leaking water
One of the common problems in many washing machines, which is repeated from time to time, and makes many confused, and wonder about the amount of water falling everywhere from the washing machine, so it is necessary to explain the reasons for water leakage from the washing machine, most of which fall under the item of neglect and misuse, Leakage is often found at the front of the washing machine, at the bottom of it, or in the back area, and each type can be explained separately as follows: 
Water leaking from the front
It means the presence of water coming from the front parts of the washing machine, which are the door, and the soap drawer. The water leakage from this part is the least among the other parts of the washing machine. There are often faults that cause water to leak from the back area and the bottom of the washing machine. Explanation of the causes of water leakage from the introduction as follows: 
Washing machine door problem
After taking the step of sorting the clothes and determining the appropriate program for them, the washing machine begins to do the washing cycle that was assigned to it, until drops of water appear on the side of the door after operation, and most likely the reason is the rubber that is located on the edges of the door, as it may have pieces, especially in the back of it, and therefore must urgently ensure its integrity, re-install it in place, or replace it with another if it is damaged. 
Malfunction of the water inlet valve
The main element responsible for supplying the washing machine with water is the inlet valve, it allows it to enter through the hoses, and as soon as the electricity is turned on and reaches the inlet valve, the washing machine drum begins to fill, but if it is damaged or malfunctioned, it will not stop supplying the drum with water, even in the position Stopping, which results in the entire drum being filled beyond its capacity, and water begins to leak from the door, even if it is closed tightly, and sometimes some cracks on the door or problems with the hinges may help increase the percentage of leakage.
Increase pressure on the soap drawer
The soap drawer is filled with water and interacts with it and returns to the washing machine drum through the holes at the bottom of the drawer, but the excessive pressure may cause some water to leak out of it, and the presence of any crack in any part of the drawer may lead to a clear loss of it, and in some cases it may not The water stops falling, and therefore the problem is in the water level sensor, which controls the amount of water that reaches the valve, and therefore will not stop drawing, and then the water will not find any exit after filling the washing machine and closing the door well except the soap drawer. One of the reasons for water leakage is also the dirtiness of the soap drawer in a way that blocks all water disposal outlets, and the use of poor quality soap, which leads to foam coming out of the drawer, violating the instructions for the quality of the powder for the washing machine, which affects its ability to negatively, and the recurrence of the same problem in the long run. The remote leads to damage to the washing machine. 
Water leaking under the washing machine
Leaked water appears clearly at the bottom of the washing machine, without the need for detection and auditing, coffee is one of the most leaky parts, and some housewives may resort to putting cloth or paper under the washing machine, to find out the source of the problem, and work to solve it, and as a kind of help, reasons can be provided. That problem, represented in the following: 
Soap Drawer Connection Hoses
A group of hoses connects between the soap drawer and the washing machine, which transfers water from the inlet valve to the drawer to return back to the drum to wash clothes and complete the entire washing cycle. Washing machine, which requires ensuring the integrity of the hoses, loosening and moving them away from each other, or replacing them if necessary.
Washing machine drum
One of the components of the washing machine, which is a fixed drum that differs from the rotating drum that washes clothes, the second is an authentic part of the first, and it may be scratched or a hole occurs in its external parts, or it may be exposed to corrosion, resulting in water leakage from inside the washing machine body, to appear in The lower parts are clearly visible, the problem may be due to the wear of the drum, and the solutions are either welding or changing the entire drum.
Drum connection hose to the exhaust pump
A hose connects between the washing machine drum and the expulsion pump, and it transfers the water after the completion of the first foam to the expulsion pump. Washing machine. 
Water leakage behind the washing machine
It ranks second in the amount of water leaking from the washing machine, and this depends on the extent of care and care for the washing machine. From the washing machine - the basis of the problem must be identified, as follows: 
Inlet hose
It is the hose that connects the washing machine and the water trap, and it is the first feeder for it, and it is often located in the back of the washing machine.

We are the only authorized agent in Egypt from General Electric

General Electric