2021-08-29

Automatic washing machine card repair in simple steps | get to know her

The washing machine was placed in the washing machine, the door was tightly closed, and the start button was pressed, to be surprised that the washing machine does not work, and the control panel does not respond, so you need to repair the full automatic washing machine card, which is the nerve of the washing machine, and when it has a malfunction it leads immediately To immobilize the washing machine, you have to follow us to the end so that you know with us the reasons for this and how to fix this malfunction at home with simple tools, so that the washing machine can spin again. 
What is the card of the automatic washing machine?
The automatic washing machine card is the control panel (the board), which consists of two parts, the first part where it is visible to the outside and includes the operation keys and external control indicators, the method of controlling may be manual or touch operation, and the second internal part includes all electrical connections which are wires that connect To the switches, in addition to the presence of capacitors and fuses that are installed on the card by welding.
The reasons for the malfunction of the automatic washing machine card
It is necessary to know the reasons that lead to malfunctions in the work of the bean automatic washing machine card, as they are related to the operation of many orders connected to the parts and components of the washing machine. Reasons: 
Irregular electric current
In the event of a weakness or irregularity in the electrical current, it becomes an alternating current and a reverse, this works on the combustion of the card and its component parts, which it is possible to verify from the source of the current (the socket), and measure the electric current, to determine this because it mostly affects the resistors and capacitors.  ;
The washing machine is not clean
When you neglect the cleanliness of the washing machine and expose it to the presence of crawling and flying insects, as it works to tamper with the parts of the cart, or rodents such as mice that gnaw wires, and the accumulation of fat, dirt and dust causes malfunctions in the cart, and stops its work. 
Defects in the washing machine card
It may be of poor quality and has many manufacturing defects with the lack of quality. Also, the frequent vibration of the washing machine works to move the card that is not well installed, and removing the card and reinstalling it incorrectly, with the lack of a tight closure (socket) as it stops the work of The card. 
How to repair the automatic bean washing machine card
It may appear that repairing a full automatic washing machine card is complicated or impossible, on the contrary, it is a very simple process in the event of arriving and determining the cause of the direct malfunction, so that you can determine your destination to replace some spare parts and install new ones, or make a comprehensive decision to change all the control panel and buy one New, original, but it is a very expensive decision due to the high price of the card. Before the final decision, you should try to repair it in the following ways: 
Detect the card using the senses
The power must be disconnected immediately, in order to remove the outer cover of the full automatic washing machine, and start dismantling the card, the control panel or the board. In one of the welding, connect the card to an external current, and disconnect it after minutes, in order to touch the pieces, and determine where there is a high temperature or a slight smell of burning in one of the parts.
Use electrical safety check tools
Connect the card to a voltmeter to measure the strength of the electric current, and use the ammeter to measure the current between the different points of the card, in addition to the traditional detection method using a bulb, in order to make sure that the internal wires connecting to the car are free of any interruption, and that the electric current feeding the main card is flowing completely to the card, in If the opposite is discovered, the card will be changed in case of complete combustion, and if some burnt and damaged parts are discovered, they will be replaced with new spare parts.
Solutions to avoid automatic washing machine card malfunctions
By taking some precautions to avoid any malfunction in the washing machine card, in order to avoid paying high costs in changing it, you may also not get an original card in return, and the alternatives are many, but they are not of the quality or efficiency of the work of the original spare parts, so you must follow the instructions The following: 
Avoid exposing the washing machine to too high a temperature.
Regular cleaning of the washing machine, inside and out.
Periodic inspection of the electric current entering the washing machine and its measurement.
Perform quick washing machine maintenance if any malfunction is detected that affects the card.
We have finished talking about the repair of the automatic washing machine card, with all the possibilities of the reasons for this happening, but it should be noted that the card is a sensitive piece that must be dealt with professionally and skillfully, so as not to break part of it or loosen one of the fixing welds, so you may need To seek the assistance of a maintenance person of the bean automatic brand of washing machine, do not hesitate to ask for help from them, so that the washing machine returns to its previous era in cleaning and removing the strongest stains efficiently

We are the only authorized agent in Egypt from General Electric

General Electric